Structure and drive of glass bottle filling machine

The glass bottle filling machine is specialized in the production of liquids with high viscosity, such as juice, syrup, edible oil, etc. In this perfusion system, the storage tank has two working chambers, one of which is an auxiliary buffer chamber.

The air pressure in the first working chamber is the same as the air pressure outside, and the liquid is stored here. The priming valve is located at the bottom of this chamber, and during priming, the air in the bottle is vented to the second chamber. Here, an adjustable vacuum is maintained throughout.

The siphonic force is created by the difference between the working chamber and the air pressure in the bottle, so the filling process is more feasible and reliable.

Structure of glass bottle filling machine:

The mechanism of the glass bottle filling machine has the advantages of high reliability and easy cleaning. All parts in contact with the pouring liquid are made of stainless steel or other materials that do not pose a hygienic hazard. In addition , the design of the filling machine focuses on the disinfection of the parts in contact with the liquid, and the CIP system is used to ensure that the beverage has a longer shelf life. At the same time, the equipment also has the characteristics of simple and safe operation, environmental protection and low consumption and energy saving.

Drive of glass bottle filling machine:

The glass bottle filling machine is driven by an asynchronous motor with a frequency converter. Beverage bottle input and output are independent. The drive of the conveyor belt at the input end is separated from the main drive of the equipment, and the conveyor belt at the output end is driven by an electric motor with a frequency converter. This transmission ensures the continuity of the beverage during start-up and operation.

The bottle dispenser before entering the filling valve is made of plastic and can be changed according to the size of the bottle.

The safety and noise-proof shield of the glass bottle filling machine is made of room rust material and glass . The beverage storage box, together with all control elements, is driven by an electric motor and can be moved up and down according to the bottle height in the range of 150-340mm.